test data/results

  • 测验数据/结果
test data/resultstest data/results
  1. The module testing and system testing retain the test data and results .

    进行模块测试和系统测试保留测试数据和结果。

  2. We have done several intrusion empirical tests and analyzed the test data and results .

    该系统监测广播网络中的TCP数据包,本文对多种入侵模式进行模拟实验,分析数据和结果。

  3. Curve Regression for Test Data XRD results show that the phosphor is in amorphous phase .

    测试数据的曲线拟合XRD测试结果显示材料是非晶态的。

  4. For shaking table tests , dynamic centrifuge tests , other model tests and test data and results were reviewed , analyzed and summarized .

    对振动台模型试验和动力离心分离机等模型试验及其试验数据和结果进行综述、分析和总结。

  5. Comparative analysis of test data and results show that both in good agreement , and have some safety margin . The calculation formulas can be provided as references for the engineering practice . 3 .

    对比分析试验数据与计算结果,二者吻合较好,并具有一定的安全度,可为工程实践提供参考。

  6. The test data and results not only can be used to provide the basis for the industrial application of high-pressure carbon dioxide pipelines in security in the future , but also provide the basis and scientific evidence for the emergency plans formulated and relevant legislation .

    随着实验数据的不断增加,这些结果将会为将来二氧化碳高压运输管道的工业化应用的安全防护提供数据,同时也将成为紧急预案制订的科学依据和相关立法的依据。

  7. We compare and analyze the original test data and experiment results .

    将信息处理结果与原始实验数据进行了分析比对。

  8. Four data ' examining approaches are applied to guarantee the reliability and accuracy of test data and identified results .

    采用了四种数据检验手段以保证试验数据和识别结果的可靠性与精度。

  9. In comparison with the measured test data the simulation results are consistent with the measured pressure-time curves .

    实验和理论预示压强时间曲线具有良好的一致性。

  10. The applicability and reliability of this method is verified by the test data and computational results from traditional finite element method .

    通过与试验资料及常规有限元方法的对比,验证了简化计算方法的适用性和可靠性。

  11. This approach was applied to the diagnosis of a gearbox test data , the results show that effectiveness of diagnosing is significantly improved .

    这种方法应用于减速器试验台数据,结果表明诊断效果得到了明显提高。

  12. At the same time , the threedimensional finite element model was calculated , The test data and the results of numerical calculation are consistent .

    同时对其进行了相应的三维有限元数值计算,计算结果与实验结果吻合较好。

  13. By contrasting the test data and FEA results , we could evaluate the response characters to vibration and safety margin of the key components .

    此外,通过对转台装置进行振动试验,对比了试验数据与仿真结果,全面的评价了结构的整体振动响应特性和关键部件的安全裕度。

  14. Therefore , the kill radius of this shaped charge warhead to various targets has been determined based on the comprehensive analysis of test data and calculation results .

    综合分析试验数据及计算结果,确定了此种战斗部对不同目标的威力半径。

  15. The calibration algorithm is verified by road test data . The results show that the algorithm has the merits of high accuracy , fast convergence and good operability .

    用道路实验数据对提出的陀螺校正算法进行验证,结果表明该算法精度高、收敛快、可操作性好。

  16. Through contrasting the results of site test data and simulation results find that both of them have the same rule , and different impact force have little effect on calculation results of crack depth .

    对比混凝土结构现场检测数据与模拟结果发现两者规律相同,并且不同的冲击力对裂缝深度计算结果影响不大。

  17. Compared the simulation data and flight test data , the results show that the simulation data accorded with the requirements of landing-gear system and all of tested data are in the tolerance scope .

    通过仿真数据与实际飞行数据的比较验证之后,所有的测试都在要求的容差范围之内。

  18. This paper compares the practical test data with the results of theoretical analyses of MMM on the stress-free temperature of CWR and proves that MMM is enough accuracy for service use .

    通过用测标法检测无缝线路锁定轨温的理论与实际测试资料的分析比较,证明测标法的检测精度对实际生产需要是足够的。

  19. Meanwhile , through the implementation and testing road test data for the study results were verified .

    同时,通过试验路的实施和试验数据,对研究的成果进行了验证。

  20. The benchmark operating point is determined by combining the field test data and the simulation results .

    将实测数据与模拟试验数据相结合,确定基准状态点。

  21. The three-dimensional imaging software of the multi-wave detecting computer processes the test data and the imaging results match the given model .

    用研制成功的多波检测计算机三维成像软件系统对观测数据进行处理,其成像结果与已知模型基本相符。

  22. We also use European standard test data to obtain simulation results of transmission telegram encoding and decoding in VC + + 6.0 .

    在VC++6.0中利用欧标中的测试数据得到传输报文编码和译码的仿真结果。

  23. By matching the test data with the simulation results , it shows that the simulation model can accurately predict the performance of the ejector .

    与试验结果对比表明,采用该方法能够正确地预测喷射压缩器的工作性能。

  24. Finally , the parameters of constitutive equation are obtained by fitting test data , the theoretic results is proved well by comparison with the experimental results .

    最后通过实验数据拟合得到本构方程中的参数,将理论结果和实验结果进行比较,结果显示,两者吻合性较好。

  25. Then the reliability method to determine fracture threshold value Δ K th is presented . After the treatment of test data , some important results are obtained .

    还建立了断裂门槛ΔKth值的可靠性测定方法,并对试验数据进行了统计分析处理,得到了一些具有重要应用价值的结果和数据。

  26. The test data and the simulation results are basically consistent . Thereby validate the correctness and feasibility of the modeling and solving by the software .

    试验测试数据与仿真结果基本&致,由此验证了仿真建模和求解的正确性和可行性。

  27. The theory results are compared with the typical triaxial compression test data and the theory results of Duncan-Chang constitutive model , it shows the redevelopment is successful .

    将二次开发程序与三轴试验数据和模型理论解进行对比,证明开发是成功的。

  28. According to " National Student Fitness Test standard " test data results and found that students mainly reflects the level of cardiopulmonary endurance ( especially the speed endurance ) is decreasing .

    《国家学生体质健康测试标准》的数据统计结果表明:主要反映大学生心肺功能水平的耐力素质(特别是速度耐力)也处于逐年下降趋势。

  29. A formula to calculate the shear capacity of the strengthened stone masonry joint is proposed based on the test data and the calculated results show good agreement with the tested ones .

    在对试验数据回归分析的基础上,提出了聚合物砂浆嵌缝加固石墙灰缝抗剪强度计算公式,计算值与试验值吻合良好,可为实际工程借鉴参考。

  30. The dynamic secant elastic modulus is introduced to analyze the test data , and the results indicate that the dynamic secant elastic modulus-strain curves of all test models are hyperbolic type .

    采用动割线模量的概念对试验数据进行了分析,认为不同试样动割线模量与动应变的关系曲线都符合双曲线的变化规律。